Feet change sizes as the ligaments relax and stretch over the years. Ill-fitting shoes have the potential to create many health problems, including blisters, calluses, hammertoes, bunions, corns, and even permanent disfigurement. Wearing shoes that are the right size will prevent these problems.

A mistake many people make is purchasing shoes that are too small. Signs include cramping and blisters between the toes. Feet should never be forced to fit the inside of a shoe. There should be ample room to allow toes to wiggle. Shoes that are too large create other problems. When the foot slides forward while stepping, toenails can turn black or even fall off. Extra friction causes blisters and calluses. Shoes that gap at the sides while walking are too wide.

The standard width for men’s shoes is “D”. The standard width for women’s shoes is “B”. These widths are acceptable if shoes currently worn are an excellent fit. If most shoes tend to be loose on the sides, a narrower width should be tried. A wider width is a better choice if the majority of shoes are tight and feet feel squeezed.

Swelling increases the size of feet during the day. The best time to have them measured is at the end of the day. Most feet are not identical. Usually one foot is larger. Choose the size of shoes that fit the larger foot. Do not focus on the size of the shoe. Many brands do not run true to size. What matters is how the shoe fits the contours of the foot.

Another mistake people make is expecting to break in the shoes. Shoes should provide a comfortable fit in the store. Wear the appropriate socks when trying on a shoe. Running shoes should be tried on with thick socks. Stilettos should be tried on with nylons. Expecting a shoe to fit within a few days means it is the wrong size.

It is crucial to wear shoes that are the correct size. Feet should be measured annually. A professional will assist with measurements and recommend shoes that will ensure the perfect fit.

Tags: annapolis, new balance, New Balance Shoes, Preventing Foot Problems, shoes for pronation, Sizing in shoes

Very few physical endeavors are as rewarding as exercise. When someone works out, they put their body and mind under stress that requires both to grow and strengthen. But if the body is injured, that improvement is halted.

Shins splints, one of the most prevalent ailments in fitness and sports, can cause just such a barrier.

What are shin splints?

Shin splints are a painful feeling in the tibia, the largest bone in the lower leg, also known as the shinbone. This condition has a swollen feeling to it, as if the shinbone were actually being pulled apart from the leg.

Shin splints, despite their name, can actually start in the foot, near the ankle. This sensation can travel all the way up to the kneecap, and can persist for weeks, even months if not treated.

Runners incur shin splints more than any other athlete because of the prolonged pressure received from pounding their feet against the ground repeatedly.

What causes shin splints?

There is a protective layering that covers the shinbone. When this sheath experiences unexpected or excessive stress, such as from exercising after a long period of inactivity or working out too hard without rest, the area can become inflamed. This inflammation creates pain in the shinbone area.

Shin splints can also be caused by tendonitis, stress fractures and exercising in improper shoes.

How are shin splints treated and prevented?

The first thing that must be addressed with shin splints is footwear. When it comes to activities like running, shoes must have excellent support. Worn, weak or ill-fitting shoes can lead to shin splints. It also helps to avoid certain types of hard surfaces when running.

Massaging and stretching the lower legs can also treat shin splints. Kinesio taping, which uses elastic therapeutic adhesive strips, can “hold” the shin bones together, allowing for recovery.

The tenderness and throbbing known as shin splints doesn’t have to be lived with. If the sufferer knows what it is, how it’s caused and what needs to be done to treat it, the injury can be left on the side of the road.

Tags: annapolis, new balance, New Balance Shoes, Shin Splints

What is a last?

A “Last” is a wood, plastic or metal model of the foot on which shoes are constructed. The shape of the last affects the width, length and fit of the shoe. Each New Balance Last is engineered to provide a unique fit and size profile to fit a unique foot shape. The most popular lasts are “SL-1″ and “SL-2″, a standard straight last and one with a higher instep and deeper toe box.

SL-1 Fit: A Last with a typical forefoot and toe box design which provides a conventional fit through the shank and instep for normal to low arch foot types.
SL-2 Fit: A Last with more volume in the toe box, a higher instep and a narrower heel. Designed to accommodate normal to high arch foot types.

Board Lasted
Board lasted shoes have a sturdy insole board running the entire length of the foot bed. This type of construction provides the greatest stability.

Combi-Lasted
Combi-lasted shoes employ slip lasting in the forefoot for enhanced flexibility and an insole board in the rear foot to control excess motion.

Strobel Lasted
Strobel lasted shoes are constructed with a thin material acting like a sock liner stretched along its perimeter. The construction provides an excellent blend of stability and flexibility.

Slip Lasted
Slip lasted shoes are constructed without an insole board. This provides the greatest flexibility and the lightest weight.

What Is Pronation?
It’s the natural rolling of the foot when walking at any pace faster than mall walking. (When mall walking, one walks heel to toe at a very slow pace.) The way one actually walks is by hitting the outside of the heel and gently rolling in, pushing off your big toe on the inside. That natural roll is called pronating.

Overpronation vs. Underpronation
If you step on the outside, curl right in and wind up on the inside of your foot that’s over-pronating. New Balance builds up the arch on specific models to force your foot out so as not to let your whole arch collapse too soon. Other people hit on the outside of their heel and stay on the outside of their foot as they walk like a duck almost that’s called under-pronating or supinating.

How do you know what you are?
You can look at old shoes and see where the front of the shoe is worn. If the front of the shoe is worn on the outside then you’re not rolling in. If the front of the shoe is all worn off by the middle then your rolling in too far too fast and you are over-pronating and walking on your arch. If you are hitting on the outside rolling in then you’re walking properly which means you would choose a neutral shoe that wouldn’t push you in and wouldn’t push you out.

Which models are made specifically for over-pronators?
The Shoes best for over-pronators are marked as “Stability Shoes. They offer more inner foot support.

Neutral shoes are marked as “Cushioning” and are intended for a neutral foot or a supinator.

How do I know if my heel width is narrow?
There really is no way to measure your heel. If you find through your life that your heel has been lifting in your shoes, it’s likely you have a narrow heel.

Some women have really skinny heels and the heels lift right out of the shoes. They feel like they are constantly walking out of their shoe, every step they take. So a lot of women who wear narrows have a 4E foot but a 2A heel which is what SL-2 and RL-2 lasts are for, they have a narrow heel.

Another clue that you’re a narrow is when you tie your shoes, the two sides are pulled all the way together. When you look at the laces if the laces are going forward and parallel that’s perfect. If the laces are really very close together then the shoe is too wide and you should be ordering a narrower width shoe.

Tags: "last", annapolis, Narrow width, new balance, new balance running shoes, New Balance Shoes, Over-Pronating, Under-Pronating, Wide width

Heads up to our followers, we changed our Twitter name to @NewBalanceShoe. Check out our FB page too http://www.facebook.com/NewBalanceShoe

Tags: Follow us on Twitter, Like us on Facebook, new balance

Pink Ribbon Sale

Save 10% on all New Balance shoes plus free shipping! Use coupon code: pink10

Susan G. Koman for the Cure

Tags: Current Specials and Promotions, new balance, New Balance Shoes, new balance walking shoes, running shoes

Hammer toes are a painful condition in which the toes become deformed, bending at the joint in a way that resembles a hammer. When the toe first begins bending in this way it still has the potential to be corrected, but over time the joint becomes fixed and the only option available to correct the condition is surgery. Hammer toes can lead to other foot deformities, including corns, callouses and bunions, creating more pain, discomfort and pressure.

What Causes Hammer Toes?

Hammer toes are primarily caused by shoes that don’t fit well. Shoes that are too tight or too small in the toe region are the most common culprits. This is especially a problem for people who have toes that are long and slender. When the toes are right up against the end of the shoe, the pressure causes them to bend over, and it can be difficult to find shoes that fit properly.

How Do You Treat Hammer Toes?

When the condition first develops it can be reversed by choosing shoes with a wide, roomy toe box and using special orthotic inserts. The inserts allow the toe to move back into its regular position, preventing further damage and allowing the toe to revert to its original state. A professional can help you select shoes that meet these requirements and create orthotics that fit you personally.

If the condition is no longer reversible with properly fitting shoes and inserts, surgery will be necessary. The surgical treatment for hammer toes involves cutting the tendon and sometimes removing the damaged bone. Recovery may take weeks.

Can You Prevent Hammer Toes?

Having your feet carefully measured and fitted by a professional, such as the folks at WeFitShoes.com is the best way to prevent hammer toes from developing. It’s especially important to keep an eye on kids with growing feet. Children’s feet grow quickly and keeping them in properly fitting shoes will prevent them from developing orthotic problems like hammer toes or bunions later in life.

Tags: Hammer Toes, lightweight running shoes, new balance, new balance running shoes, New Balance Shoes, orthotic problems, walking shoes

Few companies have dominated the shoe market like New Balance. The innovative shoe manufacturer has ran laps around the competition and taken their place atop the performance shoe podium.
Here are the 3 best New Balance walking shoes:

3) 577 Cushioning

The 577 Cushioning tackles one of walking’s most common complaints: foot fatigue. The solid sole keeps feet positioned properly, relieving pressure on the toes and joints.

The 577 Cushioning features New Balance’s signature durability. They are perfect for anyone that uses their legs to get around.

Specifics:
- $64.99
- 13.9 oz
- Walking Strike Path stabilizers
- Protective reflectors

2) 850 True Balance Toning

With the 850 True Balance Toning, New Balance has managed to deliver a shoe that is comfortable and easy to look at. The mesh body grips the feet gently but confidently, and the leaf-like lines on the soles give it a sense of speed.

Sticking to its promise, the 850 True Balance Toning provides effective toning support to wearers. Because of the ingenious construction, more calories are burned while donning these shoes than regular sports shoes.

Specifics:
- $89.99
- 8.7 oz
- Removable ABZORB cushioning inserts
- N-Durance outsole

1) 846 Motion Control

When it comes to walking shoes, the one thing wearers want more than anything else is control. As they make their way down the street, through the mall or up the trail, they want to feel like their shoes are securely fastened to their feet.

The 846 Motion Control provides amazing stability while feeling like nothing more than a pair of socks. New Balance brags that this product is their best-selling walking shoe. When you put on a pair and set out for the day, you’ll quickly realize that the company isn’t bragging. They’re just telling the truth.

Specifics:
- $119.99
- 9.8 oz
- EPM (environmentally preferred materials) manufacturing
- LIGHTENING DRY liner
New Balance doesn’t rely on extensive advertising or recognizable athletes to put their shoes on people’s feet. They focus on an old, almost forgotten method: quality. Try any of these 3 shoes and find out yourself.

Running can be a tough sport for those not quite prepared to take it on. Those who are inexperienced can often face many different types of injuries during those many miles traversed on foot. Good shoes are imperative for serious runners. Here are a few common injuries that most runners face.

Shin Splints

Shin splints are often felt as a pain in the front lower leg accompanied by swelling and possible redness on the inside of the shin. They are often caused by running on hard surfaces, such as concrete or improper foot placement in each footstep. Inadequate footwear will also cause shin splints so it is important to select the right shoes.

Runner’s Knee

This injury is felt as a tender pain and tightness on the outside of the knee area and usually aggravated by further running or downhill running. There may be areas on the outside of the knee that are sensitive to touch. Overpronation of the feet and lack of cushion on the soles of the shoes can easily cause this problem. Good amounts of cushion in the shoes will help prevent runner’s knee.

Plantar Fasciitis

This injury is a painful sensation felt underneath the heel and sometimes spread further along the bottom of the foot. It can feel painful when stretched or compressed. Plantar Fasciitis is common among runners with unusual arch sized. It can also be caused improper arch support in the shoe. Along with proper shoe arch support, use custom insoles to further support your specific foot arch.

New Balance provides many good selections for active runners. The New Balance 1123 is a great choice for those with a lower arch. It is designed to assist over and underpronators by providing good motion control and stability. Its high cushion level and durability makes it a good choice for active male runners.

Female runners will appreciate the New Balance 940 running shoe. It is a high stability trainer built with premium cushion with advanced support by using Stabilicore medial posting. It is also designed to help moderate to severe overpronators.

New Balance revolutionizing shoe design and quality has once again created a product for the intrepid runner or walker; Motion Control has arrived. New balance motion control technology provides comfort and support for a range of feet, instead of merely tailoring to a single type of customer. Quality of construction coupled with scientific engineering has allowed for the production of these superbly fitting and durable shoes.

The New Balance 1123 running shoe includes a few new expertly designed technologies, such as the ABZORB FL mid sole cushioning system, making the damaging impact of running on difficult surfaces significantly reduced. Wearing well-built shoes not only improves how the feet feel at the end of the day, but the legs and back as well. The shock from poorly made shoes with inadequate support and cushioning can negatively affect stamina and overall health; however, with New Balance Motion Control, these problems can be remedied. For these reasons the ABZORB SBS heel cushioning technology has been implemented. Additionally, the N-Durance outer sole crash pad provides the ‘grip’ that is necessary for safety, the shock absorption, and the durability to last.

For those seeking a shoe built for constant use, look no further than the New Balance 1011. These shoes include the Roll bar GR system for over-pronation protection, which many other shoes do not provide. The Ortholite insole helps to reduce odor and keep feet dry to prevent bacteria which may cause discomfort. The N-lock upper and TPU medial stability post offers further protection and support. Overall the 1011 can help to correct motion and control it with Motion Control, making sore feet into satisfied feet.

Looking for something with for the support of mild over-pronation protection with the comfort and support found with other New Balance Motion Control shoes? The MR1224 has it all. A soft landing in each step with the ABZORB cushioning system along with the reliable traction of N-Durance out sole provides the wearer with a smooth, confident stride. The Ortholite insole included can help to reduce moisture and odor inside of these magnificent shoes for the comfort of the wearer.